Linksys is a company that is famous for making networking devices. Linksys RE6500 extender is a networking device that is used for extending the wireless network in your home. You can use this wireless extender/repeater to connect wirelessly. You can also extend your network using a network cable. The wireless-n (2.4 GHz) allows you to connect devices at a speed of up to 300Mbps. The wireless-n-draft (5 GHz) allows you to connect your devices at a speed of up to 300Mbps. You will find two Ethernet ports on the device. The first Ethernet port is used for connecting the device to your main router. The other Ethernet port is used for connecting your wired devices to the extender.
Moreover, Linksys Wi-Fi Range Extender is the latest and best technology for your Wi-Fi devices. This Linksys RE6500 range Extender is very easy to operate. You can easily install and connect the device to your existing network. In order to use it, you need to have a 10/100 Mbps wired Ethernet connection. The device has the capability to retain your existing Wi-Fi name and password. Using the RE6500 Extender, you can easily enhance your existing network range. To enjoy the high-speed network signal, always upgrade firmware on extender. After that, enjoy high-speed network connectivity.
What does Linksys RE6500 Extender Blinking Orange Light?
Linksys RE6500 wifi extender Blinking Orange Light means that the software is upgrading. Now you can check the new firmware by RE6500 Extender User Manual. The LED will be always in blinking mode or solid mode which depends on the condition.
Reasons: Linksys RE6500 Extender Blinking Orange Light
There are several reasons why your Linksys RE6500 WiFi range Extender orange light will blink. The most common reason is that the extender is not getting enough power. If you have a power strip, make sure that the extender is plugged into a free outlet on the strip. If you do not have a power strip, unplug any other electronics that are plugged directly into the wall. The RE6500 should be the only thing plugged directly into the wall.
Also, be sure that your extender is close enough to the router. You should be able to see the status light from the extender from the router. If you have trouble seeing the light from the router, you may need to take the extender to another room.
Best solutions to resolve the Blinking Orange Light
You will find some of the most effective but easy solutions in the given below guide to address troubles if your Linksys re6500 extender displays an orange light. Some of the more useful methods are listed here.
Ensure the Good internet connection
Most of the time, your range extender lacks an internet connection or the Wi-Fi is switched off. This is the most likely cause of your Linksys re6500 range extender’s orange light blinking. If you are unaware of the situation, it might be frustrating. However, after reading this post, you should ensure that your router has a sufficient internet connection to avoid seeing the blinking orange light.
Restart the Linksys RE6500 range extender
Restarting the extender is one of the most suggested options due to its effectiveness and simplicity. In most circumstances, this is sufficient to clean the extender’s memory and remove any problems. To accomplish this, just detach the extender from the power supply and reconnect it after a few minutes. After that, try connecting the range extender to your primary network.
Check to see whether the orange blinking light is still on. If this is the case, please try the following solution.
Move the Linksys RE6500 extender to the closer of router
Check to see whether the distance between the primary router and the extender is the source of the problem. You can bring the RE6500 extender closer to check if the orange light stops blinking. If it continues to act in this manner, go to the following step.
Update the RE6500 extender firmware
To do linksys extender re6500 firmware update, firstly, download the newest firmware file from the Linksys support page. Connect the Linksys RE6500 extender to the PC through wireless or cable connection. Go to linksyssmartwifi.com and enter the Linksys extender login information. Click the ‘Firmware upgrade’ option, then the ‘Upload’ button. Please upload the downloaded file. Restart your Linksys equipment once you’ve finished.