Are you facing an Amped WiFi extender red light issue? If yes, then don’t worry. The amped extender blinks red light due to many reasons like internet connectivity issue, improper Amped extender setup, etc. So, here we have managed to gather all the essential information together to troubleshoot Amped extender red light issue. Just browse to the below section.
Troubleshoot Solutions
Restart your Amped WiFi Extender
Restarting your Amped WiFi extender is the best approach to fix minor technical difficulties that might be triggering the red light on your Amped WiFi extender. However, it is complex process to properly restart your device; else, it will be useless. As a result, we’ve outlined step-by step instructions for restarting your Amped WiFi extender in the below section.
- First, disconnect all WiFi-enabled devices that are connected to your Amped WiFi extender.
- After that, turn off your Amped WiFi extenderand unplug it from the power supply.
- Put it away for a while.
- Thereafter, re-connect it to the power socket and turn it on.
Now, reconnect your WiFi-enabled devices to your extender and see whether the troubleshooting hack provided above works for you. If not, go to the next step in the troubleshooting process.
Examine the Power Supply
Check for any signs of damage in the electrical socket where your Amped WiFi extender is plugged in. Sometimes, due to a faulty or short-circuited power socket, users frequently face Amped extender red light issue. So, if you find any damage in the electrical socket, then try switching it to another socket to avoid a power outage. That could be one of the reasons why the Amped WiFi extender blinking red light issue. Additionally, don’t forget to examine the condition of the power cable as it needs to be damaged-free for proper functioning.
Check Your Internet Connection
Make sure the Ethernet cable you’re using to establish a wired connection between your networking devices is free from any wear or tear. A stable and robust internet connection is required for the Amped WiFi extender to work successfully. As a result, you must inspect the condition of the Ethernet cable. If you find your Ethernet cable is damaged, replace it or change it with a new one. Apart from that, if you’re using a wireless connection, make sure your Amped WiFi extender is within range of your host router to avoid problems with connections. For best result, prefer a wired connection to setup amped wireless extender.
Avoid WiFi Signal Interference
You must need to be very careful while choosing a location for your Amped extender. Refrigerators, microwaves, baby monitors, cordless phones, Bluetooth speakers, and other smart home devices should be kept away from the WiFi repeater. Because they transmit radio waves and that can disrupt your WiFi signals. So, if your Amped WiFi extender is close to these things, you should move it as soon as possible to avoid any WiFi signal disruption resulting in Amped extender red light issue.
Reset your Extender
Resetting to the default factory settings and re-configuring it again from the basic can fix minor or major issues that are causing you to face Amped extender red light issue. However, many internet users are having trouble resetting their Amped WiFi extender. If you’re one of them, then we’ve put together a simple way to reset your Amped WiFi extender. Look over the content below; you might find it helpful.
- You must first locate the Amped WiFi extender’s Reset button.
- Push the Reset button once you’ve found it.
- After that, your Amped wireless extender will restart on its own.
- Then, your Amped WiFi extender will be restored to the default factory settings.
Now, re-configure your WiFi extender by accessing the Amped wireless range extender login page.
Hopefully, by walking through the aforementioned troubleshooting techniques, you can easily resolve Amped extender red light issue. If you aware of any other method, that we missed it here, then let us know via comment section.
