Every Netgear range extender comes embedded with software known as firmware. This software ensures that your device works well at all costs. However, many users have reported that they are unable to update the firmware of their extender. If you too are facing issues while trying to perform a Netgear extender firmware update via mywifiext, follow the troubleshooting hacks mentioned below. Trust us; they will surely be of some help to you.
Solved: Netgear Firmware Update Failed
- Restart Your Netgear Extender
Technical glitches are known to cause a number of technical issues. Chances are that you are unable to update the firmware of your wireless device because of the same reason. To get rid of these glitches, we recommend that you restart your device.
Follow the instructions given below and learn how to restart your Netgear extender:
- Power off your Netgear wireless range extender and unplug it from its socket.
- Wait for some time.
- Plug your Netgear extender back into its wall socket and power it on.
Once you are done restarting your wireless device, try to update its firmware by accessing http://192.168.1.250. Did you get any luck? If not, why don’t you follow the next troubleshooting step?
- Change Your Connection Source
Perhaps you have used a damaged Ethernet cable to connect your Netgear wireless range extender and your home router. There is nothing wrong with using an Ethernet cable to connect devices, however, sometimes; it fails to be a reliable source of connection.
To troubleshoot the issue, it is recommended that you change your connection source from wired to wireless. If doing so also doesn’t bear any fruit, do not stop reading this post yet.
- Pull Your WiFi Devices Closer
Another common reason why you are unable to update the firmware of your Netgear extender is because of the distance between your devices is too much. Therefore, make sure that both your devices are placed in close proximity. Or else, you will come across much bigger issues than the one you are currently facing.
- Avoid Signal Interference
If your Netgear wireless range extender is placed near cordless phones, washing machines, baby monitors, Bluetooth speakers, treadmills, televisions, refrigerators, microwave ovens, aluminum studs, mirrors, fish tanks, corners, concrete walls, and utensils containing water, change its location without giving it a second thought.
- Contact Your Internet Service Provider
Chances are that your Internet Service Provider is not doing his job properly. If that is the case, consider contacting him. Does he agree that there is some issue from his end? Yes? Well then, give him a couple of hours to get it fixed.
Once you are done following these troubleshooting hacks, try to update the firmware of your Netgear wireless range extender by referring to the guidelines given here:
- Switch on your computer and open an internet browser.
- Make sure that your computer is connected to the extender’s Netgear_ext.
- In the address bar of your internet browser, type the default web address.
- Press the Enter key.
- Once you are on the Netgear extender login page, enter the default admin details.
- Click the login button.
- On the Netgear Genie smart setup wizard, hit Settings.
- Click the Maintenance option.
- Select the Firmware Update button.
In some time, the firmware of your Netgear wireless range extender will get updated to its latest version. If you want, you can also update your device using the Nighthawk app.
Conclusion
Performing Netgear extender firmware updates ensures that your device works fine at all costs. But, at times, users encounter issues while executing the process. If you carefully follow the hacks mentioned above, you will surely be able to get rid of the Netgear extender firmware update failure issue.
