Out of the many issues experienced by users, the Netgear extender not connecting to the internet issue is the most common one. Are you also experiencing the same issue with your wireless range extender? If yes, then it might be because of the following reasons:
- You haven’t connected your device to Netgear_ext.
- The Ethernet connection between your Netgear extender and router is unstable.
- Your range extender is placed far from your home router.
- The signals of either your extender or router are getting interrupted.
- Your Internet Service Provider is not doing his job properly.
- Technical glitches can also cause the extender not to connect to the internet issue.
Now, take the help of the troubleshooting hacks mentioned below and learn how to get rid of the issue at hand only in a matter of minutes.
Fixed: Netgear Extender Not Connecting Issue
- Reboot Your Netgear Extender
Before you get down to any other troubleshooting hack, consider rebooting your Netgear wireless range extender. Here is how you can reboot your wireless range extender:
- Disconnect your Netgear wireless range extender from the host router.
- Turn off your extender and unplug it from its wall socket.
- Wait for some time.
- Plug your extender back into its wall socket and turn it on.
- Reconnect your Netgear wireless extender to the host router.
Now, try to access mywifiext. Are you able to? If not, then it means you are still struggling with the Netgear extender not connecting to the internet issue.
- Verify the Ethernet Connection
Chances are that the Ethernet cable connecting your Netgear wireless range extender and your home router is worn out or damaged. Therefore, consider replacing your cable with a new one. If doing so doesn’t bear any fruit, connect your devices using a wireless source.
- Pull Your WiFi Devices Closer
Do not just pay attention to the connection between your Netgear extender and your home router. The distance between them also plays an important role in the proper functioning of your device. Thus, make sure that you have placed your wireless range extender in the same room where the router is placed.
- Avoid Signal Interference
Make sure that your Netgear wireless range extender and your home router is not placed near cordless phones, washing machines, baby monitors, Bluetooth speakers, fish tanks, mirrors, treadmills, televisions, refrigerators, microwave ovens, aluminum studs, utensils containing water, corners, and thick concrete walls.
- Call Your ISP
As mentioned above, you might also be facing the Netgear extender not connecting to the internet issue because your Internet Service Provider is not doing his job properly. To confirm the same, it is recommended that you get in touch with your ISP.
Does he agree that the internet issue might be from his end? If you are nodding your head in yes, then give him some time to get the internet issue fixed.
- Perform Factory Default Reset
Even after following the troubleshooting hacks, are you still not able to connect your Netgear wireless range extender to the internet? Well, that is unfortunate. But, worry not; we still have one more hack left that might be of some assistance to you, i.e. performing Netgear extender factory default reset.
Caution: Performing factory default reset will restore your Netgear range extender to the default mode. In other words, all the settings that you have changed to date will go back to square one. Thus, only reset your device if you are willing to take the risk.
Follow the instructions mentioned below and learn how to reset your device:
- Locate the Reset button on your Netgear wireless range extender.
- Take any pointed object and press the Reset button using it.
- Wait for some time.
Once you are done resetting your Netgear extender, reconfigure it via 192.168.1.250.
With that, our guide on how to troubleshoot the Netgear extender not connecting to the internet has come to an end here. We expect that after walking through the hacks given above, you will be able to connect your device to the internet.